With a little help from Helping Hands its easy.
Make your Own! With some 12 ga wire, allagator clips, screws, washers and a wood board.
And yes that is an ATX power supply converted to a lab power supply! +/-12v, +/-5v and +3.3v!
See how to make one here.



Nearly Complete!



Don't forget the Heat Shrink Tubing around all the connections, this will keep them from shorting while in the tin! You could use electrical tape here, but thats just messy!



Before we move on lets hook up the Multimeter and test it! Steady at 4.95v!



Now attache the USB connector then lets get started on that Tin!

Next The Tin-->